Fasade 4' Polished Copper J-Trim

Fasade 4' Polished Copper J-Trims allow you to finish the edges of your Kitchen Backsplash Panels in a matching finish. These trims are easy to install and add a professional touch to your project. No special tools are required - cuts with scissors or utility knife.

This product has not yet been reviewed. Be the first to review this product by clicking here.

How to Install - Trim

Backsplash Installation

Outlet Cover Installation

Fasade Trims Installation

Adhere J-trims using double-sided tape or tube adhesive. Inside corners don't require any adhesive. They stay secure as two backsplash panels connect to them.
If the area to be covered ends on a flat wall, and you desire to finish the cut edge of the last panel, it can be done by using a piece of matching Edge J-Trim. This trim piece slides onto the cut edge of the panel.
If you have an inside corner, we recommend using a piece of matching Inside Corner Trim. See drawing below.

Aspect Edge Trim Installation

The 24" matching trims are designed to provide a finished edge for your backsplash project.
Simply measure the length of the edge you want to finish and cut the trim to that length using a utility knife, hobby knife or tin snips.
Remove the release film on the reverse (unfinished) sides and press into the exposed edge of the Aspect backsplash tiles.
The notch goes over the tiles. See illustration below.

There are currently no videos for this product.

Products specifications

Edge Type	Overlap
Fire Rating	Class A
Temperature Rating	Up to 140 Degrees
Height	0.25 in
Length	48 in
Width	0.75 in
Weight	0.10 lbs